CYCLECOMPUTING INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUEL D´INSTALLATION ET D´UTILISATION MANUALE D´INSTALLAZIONE E FUNZIONAMENTO INSTALACION Y OPERACIÓN MANUAL HANDLEIDING MC1.
P1 screw
P2 P3 1-5mm
P4 LOCK UNLOCK 2.
P5
P6
P7 Press AC-Button to Begin or install battery (P6) automatic ••••••• Press MODE 2 for next press MODE 1 to select Press MODE 2 for next press MODE 1 to select Press MODE 2 for next press MODE 1 to select Press MODE 2 for next press MODE 1 to select Press MODE 2 for next press MODE 1 to select Press MODE 2 for next press MODE 1 to select Press MODE 2 for next press MODE 1 to select
P8 1x WS in mm / inch
P9 ETRTO 47-305 47-406 34-540 47-507 23-571 40-559 44-559 47-559 50-559 54-559 57-559 37-590 20-571 16x1,75 20x1,75 24x1 3/8 24x1,75 26x1 26x1,5 26x1,6 26x1,75 26x1,9 26x2,00 26x2,125 26x1 3/8 26x3/4 WS in mm KMH WS in inch MPH 1272 1590 1948 1907 1973 2026 2051 2070 2089 2114 2133 2105 1954 50,1 62,6 76,7 75,1 77,7 79,8 80,7 81,5 82,2 83,2 84,0 82,9 76,9 ETRTO 32-630 40-622 47-622 40-635 37-622 18-622 20-622 23-622 25-622 28-622 32-622 37-622 40-622 27x1 1/4 28x1,5 28x1,75 28x1 1/2 28x1 3/8 700x18C
P10 SET Metric System SET WS 1 Start at TRIP DIST Press MODE 1 for 3 sec. Press MODE 2 to select between KMH and MPH Press MODE 1 to set WS1 Press MODE 2 to increase •••••••••••••••• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •• • • • • • SET WS 2 ••••• Press MODE 1 3 sec.
P11 SET Clock Press MODE 1 3sec.to start Press MODE 2 to switch between 24h or 12h Press MODE 1 to set the hours MODE 2 to increase the hours Press MODE 1 3 sec.
P12 P13 Set Navigator ••••••• Press MODE 2 to increase Reset Navigator Press MODE 1 to switch Press MODE1 3 sec. to end after you set the navigator •••••••••••••••••••••••••• Press MODE 1 3sec.
P14 Set ODOMETER Press MODE 1 3sec.to start Press MODE 2 to increase Press MODE 1 to switch Press MODE1 3 sec.
P15 BIKE CHECK Press any button BIKE CHECK disappears The service icon will remain flashing. Another 50 km/35 mi.
P16 Set Home altitude P17 Press MODE 1 to decrease privious value Hold down to quickly scroll Press MODE 1 3sec.to Enter Home Altitude •• Re-calibrating altimeter Press MODE 1 3sec.to Enter Home Altitude Press MODE1+MODE2 3sec. to recalibration Press ALTI 3sec.
P18 Correction of actual altitude Press MODE 1 to decrease privious value Hold down to quickly scroll Press ALTI 3sec.to Enter Real Altitude Press ALTI 3sec.
INSTALLATION AND OPERATION MANUAL - VDO MC 1.0 GB Index Preface Important information about the altimeter 1. Mounting 1.1 Handlebar holder 1.2 Speed transmitter (sender) 1.3 Spoke magnet 1.4 Twist-Click mounting of computer onto handlebarholder 1.5 Installing the battery 2. Initial set-up of your VDO MC 1.0 2.1 Basic information on how to operate your VDO MC 1.0 2.2 Interrogating information 2.3 Calling set-up mode 2.3.1 Button / key covering in set-up mode 2.4 Selecting your language 2.
Preface GB MC 1.0 Thank you very much for buying a VDO MC 1.0 bicycle computer featuring an altimeter. The more familiar you get with this model, the more enjoyable your trips are going to be. Hence, our urgent request: Please read thoroughly all the information provided in this manual. You are getting important and useful hints for operation to make you fully benefit from all the technical features of your VDO MC 1.0.
1.Mounting GB 1.1 Mounting the handlebar holder MC 1.0 The handlebar holder fits handlebars of any diameter. Before mounting the system, decide if you will be using your left or right hand to operate the computer and then mount the handlebar holder on the respective side. Position the handlebar holder, insert the strap and adjust is by tightening the screw.
1.4 Twist-Click mounting of computer on to holder GB MC 1.0 The Twist-Click mounting has been exclusively developed for the new line of VDO CYTEC computers. The VDO MC 1.0 also features the Twist-Click-System. The computerhead is put onto the handlebar and by a right turn of the computerhead (TWIST) fixed to the holder (CLICK). P4 It is just as easy to remove the computerhead from the handlebar holder. Slightly push the computerhead down, twist it to the left, remove computerhead from handlebar holder.
2. Initial set-up of your VDO MC 1.0 GB 2.1 Basic information on how to operate your VDO MC 1.0 MC 1.0 Make sure you are familiar with the computers basic operating instructions before the initial set-up and use. Your VDO MC 1.0 features 3 keys / buttons Left ...... Center......Right MODE1..... ALTI........ MODE2 The display The following information is permanentely displayed: • Current / actual speed in KMH or MPH accurate to +/- 0.
2.2 Interrogating information GB MC 1.0 With the MODE1 button you call up following information: TRIP DIST - RIDE TIME - AVG SPEED - STOP WATCH - MAX SPEED TRIP DIST trip counter for your individual trip, counting to 999.99 km or mi RIDE TIME trip timer featuring automatic start/stop function up to 19:59:59 h AVG SPEED average speed, accurate to two decimal points STOP WATCH manually operated stop watch counting up to 19:59:59 MAX SPEED maximum speed achieved during a ride up to 199.
2.3 Calling up set-up modes for computer / speedometer functions GB Other than calling up various functions and informations, the MODE 1 key calls up any set-up mode. Calling up the set-up modes requires a 3 sec pressing of the MODE 1 key. Set-up modes can be entered from various information displays: You want to set up: Wheelsize 1 or Wheelsize 2 Clock Odometer for Bike 1 Odometer for Bike 2 Navigator, second trip counter Display Information needed TRIP DIST CLOCK ODO 1 METER ODO 2 METER NAVIGATOR 2.3.
2.4 Selecting your language GB MC 1.0 After installing the battery or pressing the AC-button your VDO MC 1.0 automatically requests a display language to be selected. After installing the battery, your VDO MC 1.0 first greets you in English (by default) displaying "ENJOY YOUR MC1.0" The VDO MC 1.0 will then automatically request you to select your display language. The VDO MC 1.
2.5 Selecting the wheel circumference (wheelsize) GB Your computer VDO MC 1.0 indicates your wheel size as WS (Wheelsize) = wheel circumference. Your VDO MC 1.0 is able to process two different wheelsizes for two different bikes (i.e. road bike and mountainbike) The following default values are preset MC 1.0 Wheelsize 1 WS1 = 2155 mm wheel circumference Wheelsize 2 WS2 = 2000 mm wheel circumference Warning: After a battery change the above defaults are automatically applied.
2.5.2 Entering (programming) the wheelsize(s) GB MC 1.0 Step 1: By pressing MODE 1 call TRIP DIST in your display. Step 2: Press MODE 1 for 3 sec. In the upper part of the display you see "WS1" and "KMH" or "MPH" flashing. The lower part of the display alternately shows "ENTER MTRIC SYSTM" and "KMH" or “ENTER ENGL SYSTM” and “MPH”. Step 3: With MODE 2 you choose whether you want kilometers=KMH oder miles=MPH as a measuring unit.
2.5.3 Switching wheelsizes (changing from WS1 to WS2) GB To change from wheelsize 1 to wheelsize 2 and vice versa press and hold MODE1 and MODE2 simultaneously for 3 sec. MC 1.0 Warning: Once you have switched from wheelsize 1 to wheelsize 2 or vice versa following Tripdata of wheelsize 1 or 2 is automatically reset to zero: TRIP DIST, RIDE TIME, AVG SPEED, MAX SPEED, TRIP ALTI, AVG CLIMB, MAX ALTI, MAX CLIMB. All of these values are newly calcualted after switching the wheelsize. 2.
2.7 The NAVIGATOR GB MC 1.0 The NAVIGATOR is a second, individual trip distance counter that can be: • manually reset to zero • preset to a certain value, the trip distance is then counted from this value. The NAVIGATOR is very helpful following road book instructions or tour suggestions of bike magazines. For example, your road book tour wants you "to go straight for a mile and then make a right turn, then go on for half a mile and make a sharp left turn".
2.7.2 Resetting the NAVIGATOR to zero GB Step 1: Step 2: MODE 2 calls NAVIGATOR into display Press MODE 2 for 3 sec., the value indicated is being reset to zero. Your VDO MC 1.0 will be counting on from zero. MC 1.0 Warning: Before resetting to zero, make sure the information NAVIGATOR is called in. If NAVIGATOR is not in the display, you are accidentally re-setting other information to zero. 2.
2.9 Manual operation of the STOPWATCH GB MC 1.0 Your VDO MC 1.0 features a manual stopwatch in addition to the ride-timer with automatic Start/Stop function. The manual stopwatch is counting up to 19:59:59 HH:MM:SS There are two ways to call in the stopwatch and simultaneously start it: Direct Start: By pressing M1 and M2 briefly the stopwatch is called in and started simultaneously. Starting downhill a brief pressing of M1 and M2 will do to call in the stopwatch and start it at the same moment.
4. Service Interval Indicator GB Your VDO MC 1.0 features a Service Interval Indicator to remind you to have your bike serviced at your trusted bike shop. MC 1.0 The service interval reminder is indicated separately for both your bikes. Every 750 km / 468 mi, the service icon is activated. The service icon flashes and the lower part of the display shows "BIKE CHECK" By pressing any of the buttons, the "BIKE CHECK" information disappears.
6. Altimeter information of your VDO MC 1.0 GB MC 1.0 Your VDO MC 1.0 does permanentely display following altimeter-information: • current altitude in meters of feet • current incline or grade in % • current temperature in °C or °F Important: Current incline or grade is displayed in increments of 1%. A negative grade (descent) is indicated by a negative sign.
6.1. The home altitude or basis altitude of choice GB 6.1.1. Significance of the home or basis altitude MC 1.0 The altitude calculation works by measuring barometric pressure. Your VDO MC 1.0 converts the data of current barometric pressure into the respective altitude. In order for your VDO MC 1.0 to indicate altitude and climbing precisely, your home or basis altitude must be entered before. The current barometric pressure is allocated to the home altitude entered.
6.1.2. Setting up / entering your home or basis altitude GB MC 1.0 Step 1: By pressing ALTI call TRIP ALTI in the display. Push MODE1 for 3 sec ENTER HOME ALTI TUDE and its previous value will be displayed. Step 2: By pressing MODE2 the previous value is increased. Hold down the button to quickly scroll. By pressing MODE1 the previous value is decreased. Hold down the button to quickly scroll. Display capacity from -300 to +6000 meters / -984 to +19685 feet.
6.2 Correction of actual altitude GB While you ride, the airpressure changes due to your gain in altitude as well as due to a wether change.To correct that influence of the wether change you can also adjust the actual altitude display at your MC 1.0.Should you see a sign indicating actual altitude and should this altitude differ from the display readout at your MC 1.0, you can manually correct the actual altitude. MC 1.
8. Warranty GB MC 1.0 We warranty VDO MC 1.0 (sensor, computer head and handlebar holder) to the original purchaser for five years from date of purchase against defects in material and workmanship. This does not cover the batteries and defects resulting from normal wear and tear, improper care, accidents, abuse or alteration. Please take care to retain your receipt of purchase. In case of legitimate complaints, you are entitled to receive a comparable replacement model.
9. Technical data GB computer handlebar holder sender/transmitter batteries operating temperatures speed range trip distance counter NAVIGATOR Odometers 1 and 2 total odometer wheelsize altitude range temperature range time window for inclinometer / display refresh 45 x 52 x 16 mm computer sender LCD-display min 2.5 km/h 100 mm minimum -380 m / -1247 ft -19 °C / -4 °F min 4 sec 45 g 15 g 20 g 3V, type 2032 12 V, type V23GA -15 °C to +80 °C max 120 km/h up to 999.99 km or mi up to 999.
