User manual

Operation
131
English
Switching on / off
The Multimedia System is switched on or off together with the ignition.
If the system has not been switched to stand-by mode prior to it being switched off,
then a title screen will first appear. This is followed by information on use of the
system.
 Confirm this information by pressing the
OK
-button.
The system is started after several seconds and the various functions can be selected.
Theft protection
The system has a removable security module (detachable panel).
If the security module that is supplied with the Multimedia System is either incor-
rectly installed or not installed at all, then the system is blocked and a message
appears on the display.
If the security module is not used then the system can only be switched to stand-by.
Theft protection can also be deactivated if required. The security module is then
switched to Inactive, see Security Module function on page 137.
A
If you use the Multimedia System without the security module (security module
switched to Inactive) then please note the following:
Since the security module is missing, inadvertent activation of the security module
will lead to immediate deactivation of the system. The system can only be used again
after installation of the correct security module!
Please contact your retailer if the security module is lost.
Volume control
 Press the buttons
+
or
-
on the remote control in order to change the volume
of the audible information (see also GALA option in section Volume Level
function on page 138).
You will hear Louder or Softer with the current volume setting.

This setting affects both the volume level of the external loudspeaker
(if installed) and the volume of the built-in loudspeaker (in the display unit); if only
the volume level of the built-in loudspeaker in the monitor is to be adjusted, then
proceed as described under Set monitor (MM 5000) on page 132.
DE-IT-E_MO_MS5000.book Page 131 Sunday, November 7, 1999 10:57 PM