User manual

Operation
132
Stand-by
If you do not need the map display or visual directional information, then you can
switch them off.
 Select the Stand-by option in the Start Menu.
The display is switched off; audible messages (e.g. directional information,
if Guidance has previously been activated) continue to be provided via an
external loudspeaker.
In order to turn the display on again (turn off Stand-by), press one of the cursor
buttons
4
,
6
,
8
,
2
or the
OK
-button on the remote control.

If the system is switched off in stand-by mode it restarts in stand-by mode when
the ignition is switched on again.
Set monitor (MM 5000)
1
The colour display is equipped with OSD prompting for the display settings.
Invoke OSD menu
 Briefly press the
MENU
-button at the top of the monitor.
The OSD menu Navigation Settings is displayed.
(for Video Settings see External video connection on page 163.)
In the OSD menu you can carry out the following settings:
 Volume: Volume level of the built-in display loudspeaker
 Brightness: Brightness of the display
 DisplayMode: Screen display; the selected setting is indicated with a
yellow bar. Possible selections include:
Full Screen (16:9)
Normal (4:3)
1) does not apply in connection with MR 6000
DE-IT-E_MO_MS5000.book Page 132 Sunday, November 7, 1999 10:57 PM