User manual

Operation
134
Invoke / quit Setup menu
 Press all three buttons at the top of the display at the same time.
The Setup menu appears.
 Briefly press the
MENU
-button until the desired setting is activated.
 Carry out the setting desired.
 To quit the Setup menu press the
MENU
-button until the menu is hidden.

If a button has not been pressed for several seconds, then the OSD menu is
automatically hidden again.
Automatic brightness control
If the automatic brightness control (Bright.Contr.) in the Setup menu is set to
Auto, then the brightness of the display is automatically adjusted to the ambient
light conditions.
With the Brightness option in the OSD menu you can adjust the maximum and
minimum brightness of the display. Note that for daylight the maximum brightness
(Brightness Day) and for darkness the minimum brightness (Brightness Night)
should be set.
The brightness is then adjusted between these two limits according to the ambient
lighting.
If the automatic brightness control is switched off, then the display shows Bright-
ness Auto OFF in the OSD menu.
DE-IT-E_MO_MS5000.book Page 134 Sunday, November 7, 1999 10:57 PM