User manual

Operation
136
Screen function
Here you can select different colour combinations for the screen display and
configure the information in the status line.
The following functions are available in the Screen Settings menu:
 Day colour:
For selecting colour combinations for the screen display in daylight (setting is
active with headlights switched off).
Optimal contrast during the daytime is provided by the options Blue, Red and
Green.
 Night colour:
For selecting colour combinations for the screen display at night (setting is active
with headlights switched on).
Optimal contrast at night is provided by the options Dark blue, Dark red and
Dark green.
 Map Colour:
To adjust the change between the colour combination settings Night colour
and Day colour:
Automatic switching: Automatic switching for colour setting with head-
light display switched on and colour combination
Night colour.
Always day colour: Colour combination Day colour always active:
Always night colour: Colour combination Night colour always active:
 Statusline left or Statusline right:
For selection of the information which is to be displayed in the respective corner
of the screen:
No display: Nothing is displayed
Clock: Current time displayed
Date: Current date displayed
Remaining travel time: The remaining time calculated until arrival at the
next via point or destination (if no via points have
been entered)
Estimated time of arrival: The calculated time of arrival at the next via point
or destination.

The navigation system uses a mean cruising speed in order to calculate the
remaining travel time and the estimated time of arrival. If required, you can adapt
this speed to your actual average speed with the option System Information / Speed
Correction.
DE-IT-E_MO_MS5000.book Page 136 Sunday, November 7, 1999 10:57 PM