User manual

Guidance
145
English

The maximum number of stored via points is 25.
 Select the Via Point option in the Navigation menu.
The Via Point Input menu is displayed; the following functions are available:
 Store Via Point: Store entered address as next via point in memory
and / or list
 Load Address: Select address as via point from address book.
(functions as described under Transfer from Address
Book / Destination Memory)
 Destination Map: Enter via point with the help of the destination
map (for input see sections Destination Map and
Map Display; the entered via point becomes the last
via point in the list)
 Delete Via Point: Deleted a via point from the list
 Display Via Point: Display list of via points
 Return: Return to Navigation menu
You can enter the via points in the same way as destination addresses (see above
sections).
To transfer the entered via point to the memory:
 Select the Store Via Point function.
To delete via points:
 Select the Delete Via Point function.
A list of the stored via points will be shown.
 Select the via point to be deleted.
If you answer the request for confirmation with Yes then the selected via point will
be deleted from the memory.
Tip
: If all of the via points are to be deleted, then you can proceed as follows:
 Store the current destination address in the address book in case it is not included
there. Then select the Address Book function in the Navigation menu and
then the Store Address function and a category for the address book.
 Select the Delete Destination function in the Navigation menu.
 Answer the confirmation request Delete Via Point with Yes.
The destination address and all of the via points are now deleted.
 Afterwards, load the last used destination address in the Navigation menu
with the Address Book function and the Load Address function.
DE-IT-E_MO_MS5000.book Page 145 Sunday, November 7, 1999 10:57 PM