User manual

Guidance
146
Route Criteria
You can choose between four different criteria for calculating the driving route:
 Fastest (
t
)
suitable for every situation
Shortest (
d
)
recommended for journeys within cities
 Main road (
w
)
recommended if you prefer routes via main roads
 No main roads (
W
)
recommended if you prefer to avoid routes via main roads
In addition, you can bypass toll roads when planning your route.
The symbol for the route criterion selected (see symbol in brackets) is shown in
the status line
Adjust / change route criteria:
 Select the Settings function in the Start Menu.
The Settings menu appears.
 Select the Route Selection function.
A list appears with the route criteria described in the above.
 Activate the Avoid Toll Roads option if you want to use the least possible
number of toll roads (option with display
;
activated).

Route planning can take longer with the Avoid Toll Roads option activated
than when the option is deactivated. Therefore this option should only be activated
if it is needed.
If no toll-free roads are available, then toll roads are used for planning the route.
 Select the desired route criterion (see above).
The symbol for the newly selected route criterion is shown in the status line.

The route criterion Route Selection can also be changed during guidance. For
this you must select the Info function in the function list of the guidance screen.
DE-IT-E_MO_MS5000.book Page 146 Sunday, November 7, 1999 10:57 PM