User manual

Additional functions
163
English
External video connection
The wide screen display monitor makes it possible to connect an optional PAL video
source via a 3.5 mm stereo jack, e.g. video recorder, video camera or other video
source.
Switching on / off
As soon as a video source is connected to the TV / Video input then the display auto-
matically switches to this source; the navigation system screen displays only become
visible again after the jack plug is removed.
Settings
The following settings for video input are then available in the OSD menu:
Volume: Volume
 Brightness: Brightness
 Contrast: Contrast
 Color Colour
 DisplayMode Display mode;
You can set the following formats:
 Standard (4:3)
 Full Screen (16:9)
 Cinema
Wide 1
Wide 2
Video input connector pin assignment
GND
: ground, audio and video
Audio
: audio signal
Video
: video signal (PAL)
DE-IT-E_MO_MS5000.book Page 163 Sunday, November 7, 1999 10:57 PM