Owner`s manual

Display of road obstructions
■
In the status line
In the top right status line, the system displays whether there are any road
obstructions on the planned route.
“T” red: . . . . . . . . Road obstructions on the planned route that would cause a
severe delay.
“T” green: . . . . . . Less than 50 km to the road obstruction on the planned route. It
is possible to plan a detour using the “Local detour” function
(available only with dynamic route planning deactivated).
“T” orange: . . . . . Accepted or avoided traffic jams on the original route
(with dynamic route planning activated).
■
In the map display
If traffic information is available, the system will show the positions of accidents or
stationary traffic on the map.
1 Obstructions on the route (with a red border).
2 Affected section of route.
3 Symbols with a grey or orange border are not on the planned route and are not
relevant to the guidance.
✎
The system only displays TMC messages which you have activated under “Message
selection” in the “Info” or “Settings” menu.
■
TMC symbols
The TMC symbols are displayed differently depending on the scale of the map:
❑
Map scales of over 10 km: The traffic obstructions are displayed as triangles with a
directional arrow. The arrow indicates the travel direction of the road obstruction.
❑
Map scales of 10 km or less: The symbol indicates the type of traffic obstruction (e.g.
accident, roadblock). The road section affected is marked with arrows.
✎
See the appendix for an overview of the TMC symbols.
Navigation
26