Owner`s manual

The “Info” menu
The “Info” menu can be selected from the Start Menu and from all guidance screens.
From a guidance screen:
☞
Press the OK button from one of the navigation screens.
☞
Select “Info”, press the OK button.
☞
From the Start Menu, select “Info” and press the OK button
The following options are available:
❑
TMC Station list: Selection of a TMC station from the list of receivable TMC stations.
❑
Message selection: Selection of the TMC messages that are to be displayed on the
screen and output acoustically.
❑
Traffic on route: List of the road obstructions on the planned route.
❑
Local traffic info: List of road obstructions in a circumference of 400 km from the
current vehicle position if these are provided by the TMC supplier.
❑
Traffic at dest.: List of road obstructions in a circumference of 400 km from the next
via point/destination if these are provided by the TMC supplier.
❑
Route criteria: Selection of criterion for route planning as well as route options and
activation of the dynamic route planning. Refer also to “Settings”, page 32.
❑ Route list: List of the segments on the planned route.
❑ Points of interest: Selection of up to 5 categories of points of interest that are to be
displayed in the map display.
❑ Via points: Display of via points list and deletion of via points.
Trip computer
☞
Select “Trip computer” in the Start menu.
The integrated trip computer displays the following information:
❑
Current speed: Speed at that moment
❑
Avg. speed: Average speed (since reset)
❑
Elapsed distance: Route distance (since reset)
❑
Elapsed time: Travel time (since reset)
❑
Longitude: geographic position
❑
Latitude: geographic position
A
The speed display serves only as additional information. Only the vehicle’s speedometer
should be used to determine actual speed.
■
Resetting the trip computer
☞
Select “Reset” to reset the data for average speed, distance travelled and time
travelled to “0”.
Navigation
29