QSG-PN2050-3000.book Seite 25 Montag, 23. Oktober 2006 3:09 15 Contents 25 Contents General Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Safety Advice and Important Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Maintenance and Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Overview of Device . . . . . . . . . .
QSG-PN2050-3000.book Seite 26 Montag, 23. Oktober 2006 3:09 15 26 General Instructions Safety Advice and Important Information Before you start to mount and use this navigation system, please familiarise yourself with its various components and functions. Furthermore, please read through the safety instructions carefully to avoid causing injury to yourself and/or other road users. The use of the navigation system does not under any circumstances release the driver from his/her personal responsibility.
QSG-PN2050-3000.book Seite 27 Montag, 23. Oktober 2006 3:09 15 General Instructions 27 Do not subject the navigation system to high temperatures or extreme exposure to sunlight. Temperatures over 50 °C can severely damage the navigation system, especially the lithium ion battery. The lithium ion battery can only be charged within a temperature range of 0-45 °C.
QSG-PN2050-3000.book Seite 28 Montag, 23. Oktober 2006 3:09 15 Overview of Device 28 What's Included? Your navigation system package includes the following parts: 1 2 3 4 5 6 7 Navigation system (including lithium ion battery) Mount with suction cup to attach the device to the windscreen.
QSG-PN2050-3000.book Seite 29 Montag, 23. Oktober 2006 3:09 15 Overview of Device 29 Controls and Connection Ports PN 3000 1 2 PN 2050 Top 1 2 Power button • Quick tap: switches the navigation system to stand-by mode. • Another quick tap will turn the system on again. • Hold down the button for about 3 seconds to switch off the navigation system. • To switch the device back on again quick tap the power button. The navigation system will be completely restarted.
QSG-PN2050-3000.book Seite 30 Montag, 23.
QSG-PN2050-3000.book Seite 31 Montag, 23.
QSG-PN2050-3000.book Seite 32 Montag, 23.
QSG-PN2050-3000.book Seite 33 Montag, 23. Oktober 2006 3:09 15 Setup and Mounting 33 Initial Setup Before you can switch on the navigation system for the first time, you must connect the battery. This can be done by performing the following steps: • Open the battery compartment. • Plug the battery connector into the battery socket as you can see on the picture. Be sure to have the connector in right orientation.
QSG-PN2050-3000.book Seite 34 Montag, 23. Oktober 2006 3:09 15 Configuration 34 Configuration • • • After switching on the system, the legal disclaimer screen appears. Tap OK after reading the screen. As soon as the system is ready, the main menu will appear on the screen. Touchscreen The navigation system is equipped with a touchscreen. You can tap the on-screen button with your finger. Avoid touching the screen with sharp or roughedged objects as these can damage the sensitive touchscreen display.
QSG-PN2050-3000.book Seite 35 Montag, 23. Oktober 2006 3:09 15 Settings 35 Settings Tap the Settings button in the main menu to change basic settings. • Tap Settings. A sub-menu opens. Tap the arrow button on the bottom right of the screen to scroll through the other pages of the sub-menu. Tap Back to exit from a selection list without saving changes. You return to the previous menu.
QSG-PN2050-3000.book Seite 36 Montag, 23. Oktober 2006 3:09 15 Settings 36 If you purchased an active cradle and the navigation device is sticked to this cradle, you can activate the external speakers of your connected car audio system. By tapping the button External speakers only the internal speaker of the navigation system will be turned off. Change route You can change your route by planning Short, Medium or Long Route diversions.
QSG-PN2050-3000.book Seite 37 Montag, 23. Oktober 2006 3:09 15 GPS and TMC 37 Toolbar The toolbar is a shortcut to different functions and information (e.g. Mute, Volume setting, day or night, change route and information). You can open and close the Toolbar by tapping the bottom right of screen. GPS Status and Quality When you switch on the device for the first time, it can take several minutes for the GPS reception to reach a sufficient level and to determine your current position.
QSG-PN2050-3000.book Seite 38 Montag, 23. Oktober 2006 3:09 15 38 GPS and TMC TMC Status and Quality (only for TMC cradle) Using TMC offers you an additional function to allow you to dynamically avoid traffic jam. During navigation the system regularly accesses the latest TMC traffic information in the background; provided that this information is available in the part of the country you are in. TMC reception information can be made visible in the status bar.
QSG-PN2050-3000.book Seite 39 Montag, 23. Oktober 2006 3:09 15 Remote Control Remote control RCS 5100 39 (optional) With the remote control placed on your steering wheel, you can easily operate the navigation system while driving. You have to switch the mode switch (3) to Navigation. 1 2 3 4 5 6 7 If you press this button briefly the voice message will repeat itself. Pressing it longer the alternative route planning Menue is shown. With the cursor keys you can navigate in the menus.
QSG-PN2050-3000.book Seite 40 Montag, 23. Oktober 2006 3:09 15 Navigation 40 Navigation The purpose of the navigation system is to guide you from your present location to your desired destination. The navigation function automatically determines your present location using the GPS signal. You simply have to enter your destination and the navigation process starts with spoken and visual instructions.
QSG-PN2050-3000.book Seite 41 Montag, 23. Oktober 2006 3:09 15 Navigation 41 Intelligent typewriter The navigation system is equipped with an intelligent typewriter. This allows possible characters only. List button After you have typed a few letters you can tap the “list button“. A list of matching results appears.
QSG-PN2050-3000.book Seite 42 Montag, 23. Oktober 2006 3:09 15 Navigation 42 Confirmation When you have entered the destination, all elements for the desired destination appear on the Confirmation screen; the system will confirm your selection. Additionally you have the possibility to store the destination: in the Address book or as shortcuts under Home and Work. You can also adjust the navigation settings (e.g. plan short or fast route).
QSG-PN2050-3000.book Seite 43 Montag, 23. Oktober 2006 3:09 15 Navigation 43 Note The transparent column right on the map shows visible instructions (e.g. a dotted arrow representing "Follow the road"). The map itself shows different elements witch can be switched on and off. You can do this by tapping Map display in the Toolbar or in Settings. Toolbar Tapping the bottom right of screen, you can open the Toolbar, a shortcut to different functions and information.
QSG-PN2050-3000.book Seite 44 Montag, 23. Oktober 2006 3:09 15 44 Multimedia The Multimedia Menu The navigation system offers the possibility of playing MP3 files, viewing JPEG images or playing games. In order to be able to use these multimedia functions, the MP3 or JPEG files in question must be saved on an SD card.
QSG-PN2050-3000.book Seite 45 Montag, 23. Oktober 2006 3:09 15 Multimedia After tapping the requested title, you´ll see on the screen: • the name of the current title • the total playing time in the in the upper bar and • time played in the lower bar. 45 1 2 3 4 By tapping the symbols on the left you can perform 6 5 following functions: 1 Jump to next title 2 Start playing, or pause during playing 3 Switch to the selection menu (Menu).
QSG-PN2050-3000.book Seite 46 Montag, 23. Oktober 2006 3:09 15 46 Multimedia Viewing Pictures – The Picture-Viewer Tap the Picture-Viewer button. • On the screen, you will see the picture and the number of the picture in the upper bar within the corres-ponding folder.
QSG-PN2050-3000.book Seite 47 Montag, 23. Oktober 2006 3:09 15 Troubleshooting 47 Troubleshooting Problem Solution No GPS signal in vehicle The GPS signal can be blocked by heated windscreens or tinted windscreens with a vacuum-metallised surface. In this case, you will need an external GPS antenna. (available from accessory dealers, Article-no. MA2010/00) No GPS signal Make sure that the GPS antenna on the top of the navigation system is not obstructed by other objects.
QSG-PN2050-3000.book Seite 48 Montag, 23. Oktober 2006 3:09 15 Further Information 48 Technical Data PN 2050 3.5" colour TFT LCD with a 320 x 240 pixel resolution, touchscreen, anti-reflex surface Processor: 300 MHz 64 MB Flash ROM and 64 MB SD RAM 12 channel GPS receiver Lithium-ion battery with a capacity of 1400 mAh Dimensions: approx. 105 mm width x 79 mm height x 23 mm depth Weight: approx.