Operation Manual

X3DW VDO CYCLECOMPUTING2
GB SLO PL JP
JP PL SLO GB
www.vdocyclecomputing.com X3DW 3
Preface
Congratulations
With your selection of a VDO computer you have opted for a technically very high quality appliance.
In order to fully benefit from the potential of the computer, we recommend that you carefully read this
manual. It contains all operating instructions and many other useful tips.
We hope you enjoy cycling with your VDO bike computer.
Cycle Parts GmbH
Pack contents
Please first check that this pack is complete:
Table of contents
1 VDO computer
Battery installed
1 universal handlebar holder
1 speed transmitter
Battery installed
1 rubber pad
for transmitter
1 spoke magnet
(clip magnet)
cable ties
for fitting the holder
and transmitter
1. Display 4
2. Operation 6
3. Functions 7
3.1 Information functions 7
in function mode
3.2 Timer-Functions 8
3.3 Cadence option 9
4. Installation 9
4.1 Fitting the transmitter, magnet
and handlebar holder 9
4.2 Switching on the computer
for the first time 10
4.3 Installing the battery in the computer 10
4.4 Language setting
after battery change 11
4.5 Placing the computer into
the handlebar holder 11
4.6 Transmitter pairing 12
5. Basic settings 12
5.1 Setting the language 12
5.2 Setting and measuring the wheel size 13
5.2.1 Select from tyre table 13
5.2.2 Setting using wheel circumference 14
5.3 Setting the clock/alarm 16
5.4 Setting the total kilometres 17
5.5 Switch from bike 1 to bike 2 18
5.6 Service interval display
18
5.7 The navigator 19
5.8 Sleep mode 20
5.9 Reset functions 21
6. Timing functions 22
6.1 Selecting timers 23
6.2 Setting timers 23
6.3 Operating the timers 26
7. Terms of guarantee 27
8. Troubleshooting 28
9. Technical spezifications 29
„>>> P02“ links at the beginning of a chapter
are related to the respective picture in the
picture book!