Operation Manual

X3DW VDO CYCLECOMPUTING44
F I
www.vdocyclecomputing.com X3DW 45
DGBFID GB
ALARM/SET OK? Confirm with
M
.
The display confirms: ALARM/SET DONE.
Automatic return to SETTINGS/SELECT.
If you have set the alarm to ON, the alarm symbol
appears on the bottom left of the display
-Symbol.
ALARM...SET HOUR/CONTINUE
Set the hours using up/down.
Confirm the hour setting
with
M
.
ALARM...SET MINUTES/
CONTINUE. Set the minutes
using . Confirm the minutes
setting with
M
.
CLOCK/SET OK? Confirm with
M
.
The display confirms: CLOCK/SET DONE.
Automatic return to SETTINGS/SELECT.
How to set the alarm:
Using go to SETTINGS/
SELECT. Confirm with
M
.
You are now in setting mode
(pressing
C
for  seconds gets
you back to function mode).
Using go to CLOCK/ALARM/
SET. Confirm with
M
.
CLOCK/ALARM/CLOCK SET.
Using you can switch to
alarm set.
CLOCK/ALARM/ALARM SET.
Confirm with
M
.
ALARM OFF or ALARM ON
appears on the display.Switch the alarm OFF
or ON using . With ALARM ON you come
to the alarm time setting. Confirm with
M
.
5.3 Setting the Clock/Alarm
How to set the clock:
Using go to SETTINGS/
SELECT. Confirm with
M
You are now in setting mode
(pressing
C
for  seconds gets
you back to function mode).
Using go to CLOCK/ALARM/
SET. Confirm with
M
.
CLOCK/ALARM/CLOCK SET.
Confirm with
M
.
CLOCK/ALARM/-H-MODE.
You can switch to -H mode
using . Confirm with
M
.
CLOCK...SET HOUR/CONTINUE
Set the hours using .
Confirm the hour setting
with
M
.
CLOCK...SET MINUTES/
CONTINUE. Set the minutes
using . Confirm the minutes
setting with
M
.
You can program the values on the distance coun-
ter at any time (e.g. at the end of a season).
Using go to SETTINGS/
SELECT. Confirm with
M
.
You are now in setting mode
(pressing
C
for  seconds gets
you back to function mode).
Using go to ODOMETER/
SET. Confirm with
M
.
ODOMETER/ODO BIKE 
(use to go to setting for
BIKE ). Confirm with
M
.
ODO BIKE  ...SET DISTANCE/
CONTINUE.
5.4 Setting the total kilometres
You can set the flashing digits
using .
To access the next digit, con-
firm with
M
. Repeat the steps
until the last digit on the right
is flashing. Confirm with
M
.
ODO BIKE /SET OK? Confirm with
M
.
The display confirms ODO BIKE /SET DONE.
Automatic return to SETTINGS/SELECT.