Operation Manual

X3DW VDO CYCLECOMPUTING52
F I
I F
www.vdocyclecomputing.com X3DW 53
GB DD
LAP TIMER/MANUAL START
(use to switch LAP TIMER/
AUTO START. Confirm with
M
.
If you have chosen AUTO START, you must now
enter the distance, after which the next lap is
automatically started (e.g.  km)
LAP TIMER… SET DISTANCE/
CONTINUE
The flashing digit is ready to be
entered. Enter the value using
. Change to the next digit with
M
. Repeat up to the last digit
Confirm with
M
.
LAP TIMER/SET OK? Confirm with
M
.
Return message LAP TIMER/SET DONE.
Return to SETTINGS/SELECT.
Set the flashing digits using
. Change to the next
digit with
M
. Repeat up to the
last digit. Confirm with
M
.
TIME TRIAL/SET OK? Confirm with
M
.
Return confirmation on the display:
TIME TRIAL/SET DONE.
Return to SETTINGS/SELECT.
Setting lap timer:
On the lap timer, you can choose between starting
the next lap manually or automatically. If you
have chosen „automatic“, then you must specify a
distance, after which the next lap is then started
automatically.
Using go to SETTINGS/
SELECT. Confirm with
M
. You are
now in setting mode (pressing
C
for  seconds gets you back to
function mode).
Using go to TIMER/SET.
Confirm with
M
.
Using select the timer you
want to set TIMER/LAP TIMER.
Confirm with
M
.
TIMER+…SET REPEATS/
CONTINUE. Using enter
the number of repeats you
want (e.g. in interval training).
Confirm with
M
.
TIMER+/SET OK? Confirm with
M
.
Return confirmation: TIMER+/SET DONE
Your VDO computer automatically returns to the
menu SETTINGS/SELECT.
Setting TIME TRIAL timer:
Using go to SETTINGS/
SELECT. Confirm with
M
. You are
now in setting mode (pressing
C
for  seconds gets you back to
function mode).
Using go to TIMER/SET
Confirm with
M
.
Using select the timer you
want to set TIMER/TIME TRIAL
Confirm with
M
.
TIME TRIAL....SET DISTANCE/
CONTINUE. Now enter the
distance for the time trial.
Using select the timer you want to set:
B
TIMER
B
TIMER
B
COUNTDOWN
Confirm with
M
. flashing digits are ready
to be set.
Set hours using . Confirm with
M
.
Set minutes using . Confirm with
M
.
Set seconds using . Confirm with
M
.
SET OK? Confirm with
M
.
TIMER or TIMER or COUNTDOWN/SET DONE
appears briefly and your VDO computer automati-
cally returns to SETTINGS/SELECT.
Setting TIMER1+2
Using go to
SETTINGS / SELECT Confirm with
M
. You are now in setting mode
(pressing
C
for  seconds gets
you back to function mode).
Using go to TIMER/SET.
Confirm with
M
.
Using select the timer you
want to set TIMER+.
Confirm with
M
.
GB