Instruction Manual

ATTENTION: Your computer can save the codes of up to 5 transmitters
1. Speed transmitter of bike 1
2. Speed transmitter of bike 2
3. Cadence transmitter of bike 1 (optional)
4. Cadence transmitter of bike 2 (optional)
5. Pulse transmitter
3.3.1. INITIAL OPERATION - PULSE TRANSMITTER
Put the pulse transmitter belt on and moisten the electrodes
(chapter 2.3)
3sec. O Setting mode LANGUAGE SELECT
O O Select DIG CONNECT SET
UD Display DIG CONNECT
O O Select PULSE SEARCH
UD PULSE PAIRING
PAIR DONE appears in the display after several seconds if the pulse
transmitter was found. Automatic return to the TRIP DIST menu. If the
pulse transmitter was not found PULSE REPEAT appears. Use UD to
repeat the pairing process for the pulse transmitter. For troubleshooting
see chapter 16.
3.3.2. INITIAL OPERATION - SPEED TRANSMITTER
3sec. O Setting mode LANGUAGE SELECT
O O Select DIG CONNECT SET
UD Display DIG CONNECT
O O Select SPEED SEARCH
UD SPEED PAIRING
Now turn the front wheel (both magnet and transmitter must be already
mounted)
PAIR DONE appears in the display after several seconds if the speed
transmitter was found. Automatic return to the TRIP DIST menu
SPEED REPEAT appears if the speed transmitter was not found.
Use UD to repeat the pairing process for the speed transmitter.
For troubleshooting see chapter 16.
3.3.3. INITIAL OPERATION - CADENCE TRANSMITTER (OPTIONAL
EXTENSION see chapter 1.5)
3sec.
O
o o
CD
o o
CD
Setting mode LANGUAGE SELECT
Select DIG CONNECT SET
Display DIG CONNECT
Select CADENCE SEARCH
CADENCE PAIRING
Now turn the crank (magnet and transmitter must be already mounted)
PAIR DONE appears in the display after several seconds if the cadence
transmitter was found.
Automatic return to the TRIP DIST menu
If the cadence transmitter was not found CADENCE REPEAT will be
displayed.
With CD repeat the pairing for the cadence transmitter
For troubleshooting see chapter 16.
IMPORTANT NOTE / Re-open of transmitter search for the receive
channel after interruption
If no signal is received from an already paired transmitter after 15
minutes (for example riding without chest belt for Z2 and Z3, also
14