User guide

INSTRUCTION MANUAL
PC-LINK models), the receive channel will be closed for this transmitter.
In this case your VDO computer will show dashes for the respective
function in the display. To re-open all receive channels press the O
and Q buttons at the same time: Now your VDO computer will again
receive all previously paired transmitters that are in range.
4. GENERAL SETTINGS
4.1. SETTING THE LANGUAGE
3sec. O Setting mode LANGUAGE SELECT
UD LANGUAGE SELECT
O O Select „LANGUAGE ENGLISH“
UD Automatic return to TRIP DIST
Language selection done.
4.2. SETTING TIME & DATE
3 sec.
o
Setting mode LANGUAGE SELECT
o o
CLOCK SET
CD
SET HOUR ?CONTINUE?
o o
Setting hours
CD
SET MINUTES ?CONTINUE?
o o
Setting minutes
CD
SET YEAR ?CONTINUE?
o o
Setting the year
CD
SET MONTH ?CONTINUE?
o o
Setting the month
CD
SET DAY ?CONTINUE?
o o
Setting the day
UD CLOCK ?SET OK?
UD CLOCK SET DONE
Automatic return to CLOCK
4.3. SETTING THE ALARM, ALARM CLOCK
3 sec. O Setting mode LANGUAGE SELECT
O O ALARM SET
UD ALARM ON or ALARM OFF ( (3 to switch on)
When the alarm clock is switched off setting mode ends automatically
by UD .
UD SET HOUR ?CONTINUE?
O O Selecting the hours value
UD „SET MINUTES ?CONTINUE?
O O Selecting the minutes value
UD ALARM ?SET OK?
UD ALARM SET DONE!
Automatic return to the operation mode for CLOCK. Setting the alarm
clock done.
The alarm clock icon is now shown in the display (center bar left).
5. BICYCLE FUNCTION SETTINGS
5.1. Measuring and setting wheel size/s
In order for your VDO computer to measure correctly you must first
measure the circumference of your wheel. If this value is set incorrectly
then all values calculated on the basis of this value, such as speed, trip,
etc. will be wrong. To use your VDO computer on two different bikes
e.g. mountain bike and road bike you can enter two different wheel
sizes. Measuring the wheel circumference: