User guide

Automatic return to the operation mode for ALTI UP. The set home
altitude will be displayed as actual altitude. Home altitude set done
Re-calibrating the air pressure to home altitude. Important: Prior to
each trip the actual measured pressure must be calculated back to the
set home altitude = re-calibrate. Short-cut press the Q button for 4
seconds.
?
8.2. SETTING THE ACTUAL ALTITUDE
3 sec. O Setting mode LANGUAGE SELECT
O O ACTUAL ALTI SET
O O Setting the actual altitude
UD ACTUAL ALTI ?SET OK?
UD ACTUAL ALTI SET DONE
Automatic return to the operation mode for ALTI UP Actual altitude set
done
3 sec. O Setting mode LANGUAGE SELECT
O O ALTI UP SET
UD ALTI UP 1 SET (for bike 2 or walking
O ALTI UP 2 SET / WALK UP SET)
UD ALTI UP 1 NEXT DIGIT/ ALTI UP 2 NEXT DIGIT / WALK
UP NEXT DIGIT
O O Set last digit (keep button depressed for fast
run-through)
UD ... repeat for all digits from back to front
UD ALTI UP 1 ?SET OK? / ALTI UP 2 ?SET OK?
/ WALK UP ?SET OK?
O O Setting the first digit
UD ALTI UP 1 SET DONE / ALTI UP 2 SET DONE
/ WALK UP SET DONE
Automatic return to the operation mode for TOTAL UP Annual uphill
altitude gain set done.
8.3. ANNUAL UPHILL ALTITUDE GAIN BIKE 1 AND BIKE 2 AND WALK
MODE
Your VDO computer accumulates values for the meters in altitude for
the uphill gain covered separately for:
- Bike 1
- Bike 2
- Walk mode (see chapter 10 for selection)
These values can be programmed in, if for example you want to trans
fer the values from an older device, or if the values have been deleted
when changing batteries.
Setting the annual uphill gain in altitude
8.4. ANNUAL DOWNHILL ALTITUDE LOSS BIKE 1 AND BIKE 2 AND WALK
MODE
Setting the annual downhill altitude loss
3 sec. O Setting mode LANGUAGE SELECT
O O ALTI DOWN SET
UD ALTI DOWN 1 SET (for bike 2 or
walking O ALTI DOWN 2 SET / WALK DOWN SET)
UD ALTI DOWN 1 NEXT DIGIT / ALTI DOWN 2 NEXT DIGIT
/ WALK DOWN NEXT DIGIT
O O Set last digit (keep button depressed for fast
run-through)
22