Instruction Manual

Table Of Contents

INSTRUCTION MANUAL

FOR

DISPLAY COOLER

V069

Please read this manual

carefully, and make sure

to keep this manual in the

place accessible by the

user at any time.

display cooler

SC68/V069

EN 55014-1:2017. EN 55014-2:2015

EN 61000-3-2:2014, EN 61000-3-3:2013

30-05-2022

CVC

PAGE 1
display cooler SC68/V069 INSTRUCTION MANUAL FOR DISPLAY COOLER V069 CVC EN 55014-1:2017. EN 55014-2:2015 EN 61000-3-2:2014, EN 61000-3-3:2013 30-05-2022 Please read this manual carefully, and make sure to keep this manual in the place accessible by the user at any time .
PAGE 2
1、Structural diagram Hinge cover Control panel Problems Inner light Possible cause Ways to solve problems The unit is not level Adjust the adjustable legs Magnetic seal Case Too high noise Shelf Light is not on Brace Glass door Foot 2、Specifications Model Climatic class Storage Temperature ( ℃) V069 N 0～10 Anti-shock protection class Ⅰ Capacity (L) 68 Rated Voltage (V) 220V Rated Frequency (Hz) 50Hz LAMP max power(W) 10 Power consumption:(kW·h/24h) 0.
PAGE 3
Problems Possible cause Abnormal operation of The power voltage the compressor or has is out of the rated range. buzz sound Ways to solve problems Disconnect the power supply immediately and reconnect with it after normal voltage. It is necessary to have a voltage stabilizer in case of poor power supply.
PAGE 4
) After moving the unit, place the unit for 30 minutes before switching it on. Running: close the door and connect the power, turn on the lamp switch on the control panel, the lamp is on. Half an hour later, the temperature inside the case lower apparently, it indicates the unit on be normally used 5) After connecting the power, the unit should be kept empty for one hour. 6.