User's Manual

AMG1000BHx HD Truck Kit Installation Guide 11
Securing the unit using Zip Ties
The unit may be secured to the vehicle using two zip ties as shown in Figure 17. Note that
the zip ties should be positioned inside the zip tie fences on the AMG base unit enclosure.
Figure 17: Securing the AMG base unit using Zip Ties
6.0 Mounting the Antenna
The backpack antenna may be mounted directly on the AMG base unit once the base unit is
secured to the vehicle. Alternatively, if desired the backpack antenna may be mounted up to
3 feet away from the AMG base unit using two #6 or M3.5 Pan Head Screws with a
maximum head diameter of 0.275". The recommended maximum torque is 5.0 in-lbs. If
holes are to be pre-drilled, space them 3 inches apart as shown in Figure 18.
Area of the vehicle to
anchor AMG unit
Zip Tie fences prevent the
zip ties from slipping off side
Position Zip Tie on inner
side of fence