User's Manual

12 AMG1000BHx HD Truck Kit Installation Guide
Figure 18: Backpack Antenna Mounting Holes
7.0 Confirm AMG Operation
The unit is working properly when all four lights are green and blinking. Power up the truck
to confirm this is the case. PWR, CELL, and DATA lights should begin to maintain a green and
blinking status within 60 seconds – the GPS LED may need a few minutes longer. Once all
four lights are green and blinking, re-install the dashboard.
IF ALL FOUR LIGHTS ARE NOT GREEN AND BLINKING...
• If the “DATA” light is not green and blinking – confirm the connection to the J1939
databus is completed as described in this guide.
• If “GPS” or “CELL” light is not green and blinking (i.e., unblinking amber), and the
vehicle is in a garage, drive the vehicle outside with a clear line-of-sight to the sky.
If the vehicle is already outside, check the position of the backpack antenna, making
sure it is parallel to the ground and not obstructed by any metal objects. If these
lights are still not green and blinking, call 888-558-6188 ext 1 for installation
assistance.
• If the “PWR” light is not green and blinking (i.e., all lights are off or PWR is
unblinking red), please recheck the power cables and connectors. If the problem
persists please call 1-888-558-6188 ext. 1 for installation assistance.
8.0 Return the AMG Installation Form
Fax the completed AMG Installation form to [phone].
#6 or M3.5 Pan Head Screw
Head diameter 0.275" max.
Maximum torque 5.0 in-lbs
3.29”
4.47”
1.63”
1.78”
4.78”
6.55”
0.150” x 2
1.12”
Note: Record the Post-Installation Information on the Installation Form located in AMG Kit.