User's Manual

AMG1000BHx HD Truck Kit Installation Guide 3
Figure 2: AMG Serial Number
Step 2: Call 1-888-558-6188 ext. 1
Call this number once the information from Step 1 is obtained. A customer service agent will
then activate the unit. It will usually take a few minutes to complete.
Identify the best location for installation:
Before the wiring harness, AMG base unit, and antenna are installed, it is strongly
recommended that the vehicle cab is inspected for potential installation locations and an
installation plan is devised. Keep the following information in mind when locating a suitable
install location and plan:
1) The AMG base unit may not be installed any further than 16 feet away from the J1939
bus splice.
2) The backpack antenna (included in AMG1000BHx kits only) may be installed either on
the AMG unit itself or up to 3 feet away from the AMG base unit.
3) Antenna reception is critical for effective AMG operation, therefore the antenna must not
be obstructed by metal objects. Optimal antenna orientation is shown in Figures 3 & 4.
Figure 3: Optimal Unit Orientation (antenna attached to base)
P/N:
UNIT S/N:
1234567890
1234567890
AMG1020U
AMG1020U
[phone] ext 1
Il est important que le numéro de série
de cet appareil soit associé au numéro
du camion qui recevra cet appareil.
It is important that the UNIT S/N is
associated with the Truck # that
will receive this unit.
Please call
to activate
Veuillez appeler
pour activer
AMG Serial Number
Bottom of AMG Unit
AMG Bar Code Label (Close Up)
P/N:
UNIT S/N:
1234567890
1234567890
AMG1020U
AMG1020U
MODEL: AMG1020U
FCC ID: OPP-AMG1020X
IC ID: 2943A-AMG1020
Unit mounted with backpack attached to base:
BEST
NOT
ADVISED
AVOID
ENTIRELY
The mounting location
should provide access
to the cable connections
on the AMG base unit.
Ideally, this side should be facing UP
with no metal objects between it and the
sky
The mounting
location should
allow the status
LEDs to be visible.