User's Manual Part 1

7: Configuring the CCU
APCD-LM043-8.0 (DRAFT C) 131
60:06:4e> auth radius primary 192.168.60.96
Enter password (up to 16 chars): *********
Radius Authentication Enabled, Period: 5
Radius Accounting is Disabled
Radius Primary Server : 192.168.60.96
Radius Secondary Server:
NOTE: This password must match the Shared Secret Password entered
at the RADIUS server.
3. If your network includes a second RADIUS server, set the RADIUS server IP address
and Shared Secret Password. Otherwise, set the secondary RADIUS server IP
address to “none”.
60:06:4e> auth radius secondary 172.16.6.96
Enter password (up to 16 chars): *********
Radius Authentication Enabled, Period: 5
Radius Accounting is Disabled
Radius Primary Server : 192.168.60.96
Radius Secondary Server: 172.16.6.96
4. (Optional) Enable RADIUS accounting.
60:06:4e> auth radius accounting enable
Radius Authentication Enabled, Period: 60
Radius Accounting is Enabled
Radius Primary Server : 192.168.60.96
Radius Secondary Server: 172.16.6.96
5. Save settings.
60:06:4e> save
Basic Config saved
Port Filter Config saved
sntp cfg file saved
Route Config saved
Authorization Database saved
DHCP Server Config saved
6. Display the RADIUS settings.
60:06:4e> auth radius
Radius Authentication Enabled, Period: 60
Radius Accounting is Enabled
Radius Primary Server : 192.168.60.96
Radius Secondary Server: 172.16.6.96
NOTE: Use the stats auth command to view RADIUS statistics, which
are useful for troubleshooting purposes. Also, use
sys log to
detect if there are any malformed RADIUS packets.
7.10.3 RADIUS Packet Transmission
Once the CCU RADIUS client and the RADIUS server have been configured and enabled,
access and accounting messages will be transmitted between them. The following is an
example of the messages that are transmitted between the two. This information can be used
for troubleshooting purposes.