User's Manual Part 1

xx APCD-LM043-8.0 (DRAFT C)
:
WARNING!
To comply with FCC RF exposure limits, the antennas for the
CCU must be fix-mounted on outdoor permanent structures
to provide a separation distance of 2m or more from all
persons to satisfy RF exposure requirements. The distance is
measured from the front of the antenna to the human body. It
is recommended that the antenna be installed in a location
with minimal pathway disruption by nearby personnel.
The antennas for the EUM must be fix-mounted, indoors or
outdoors, to provide a separation distance of 20cm or more
from all persons to satisfy RF exposure requirements. The
distance is measured from the front of the antenna to the
human body. Again, it is recommended that the antenna be
installed in a location with minimal pathway disruption by
nearby personnel.
Notice to Users
Special Accessories
In order to comply with FCC Part 15 standards, the EUM3003 must be used with an Ethernet
Patch Cable with permanently attached ferrite filter. This cable is supplied as part of the
EUM3003 kit. Additional cables, both crossover and straight-through, are available from
WaveRider Communications Inc. Responsibility to ensure the correct patch cable is used lies
with the end-user.
Customer Support
WaveRider offers a complete training program. Please contact your sales representative for
training information.
Telephone: [phone]
Fax: [phone]
Email: Customer Services Group:
[e-mail]
Customer Documentation Feedback and Comments:
[e-mail]
URL: www.waverider.com