User's Manual Part 2

268 APCD-LM043-8.0 (DRAFT C)
Appendix I: SNMP MIB Definitions
Table 74 WaveRider EUM General Information Enterprise MIBs
EUM Radio Configuration Group
All EUM Radio Configuration Group MIB values are read only. All values in Table 75 are
prefixed with 1.3.6.1.4.1.2979.12.2.
Table 75 WaveRider EUM Radio Configuration Enterprise MIBs
MIB Name OID Value Type Status
Accepted
Values
Description
eumGlobalSerialNumber 1 String R EUM hardware serial
number
eumGlobalSoftwareVersion 2 String R EUM firmware version.
eumGlobalHardwareVersion 3 String R EUM hardware version.
eumGlobalCapability 4 Integer R Special option
identification mask.
eumGlobalStatus 5 Integer R 1: startup
2: dead
3: ok
4: suspect
Current status of the radio
interface. For now, this
field returns ‘ok’.
eumGlobalSaveCounter 6 Counter R A count of the number of
times the configuration is
saved. Initially, this field
always returns ‘0’.
eumGlobalConfigFiles 7 String R A list of configuration files
for the EUM. The list is
delimited with a semicolon;
i.e., “basic.cfg;route.cfg, ...”
eumGlobalReset 8 Integer W 1: reset Not functional at this time.
eumGlobalReload 9 Integer W 1: reload Not functional at this time.
eumGlobalConnectionType 10 Integer R 1: ethernet
2: usb
The type of customer
connection.
MIB Name OID
Value
Type
Accepted Values Description
eumRadioConfigVersion 1 String Radio firmware version.
eumRadioUnitMacAddress 2 Physical
Address
MAC address Radio MAC address.
eumRadioConfigFrequency 3 Integer Radio frequency in use (in
1/10ths of a MHz)
eumRadioConfigDomain 4 Integer 0: IEEE
1: FCC or IC/Canada
Current regulatory domain
for which the radio is
configured.
eumRadioHardwareRevision 5 String Radio hardware revision.