User's Manual Part 2

278 APCD-LM043-8.0 (DRAFT C)
Appendix J: Operating Statistics
To Display (all) Statistics from the CLI
• At the command prompt, type stats and press Enter.
The following sections describe each of the statistics in detail and the procedure for obtaining
specific sets of statistics (Ethernet, Radio, and so on).
Ethernet Statistics
Ethernet Statistics present operational information about data passing through the CCU and
EUM Ethernet ports. These statistics are described in Table 82.
As indicated in Table 82, all of the Ethernet statistics are available in a WaveRider MIB.
Table 82 Ethernet Statistics
Statistic Description
Interrupts Total number of interrupts received by the Ethernet
driver ISR, interrupt service routine.
RX Interrupts Number of
receive complete interrupts received by the
Ethernet driver ISR.
RX Overrun Interrupts Number of
overrun interrupts received by the Ethernet
driver ISR. An overrun occurs when a received packet
has exceeded the packet size, or the processor has
missed one or more packets.
RX In Progress Interrupts Number of times a
receive complete interrupt was
received by the Ethernet driver ISR before the current
packet was finished.
TX Complete Interrupts Number of normal transmit interrupts received by the
Ethernet driver ISR.
TX Error Interrupts Number of
transmit error interrupts received by the
Ethernet driver ISR.
TX Carrier Lost Interrupts Number of
transmit carrier lost interrupts received by
the Ethernet driver ISR.
TX Alloc Interrupts Number of
transmit allocation complete interrupts
received by the Ethernet driver ISR.
TX EPH Interrupts Number of
transmit EPH interrupts (Ethernet protocol
handler interrupts) received by the Ethernet driver
ISR.
TX ERCV Interrupts Number of
transmit ERCV interrupts (early receive
interrupts) received by the Ethernet driver ISR.