User's Manual Part 2

Appendix C: Command-Line Syntax
APCD-LM043-8.0 (DRAFT C) 195
file get
<aaa.bbb.ccc.ddd>|<EUM_ID>
<username> [<password>|_]
<source> <destination>
NOTE:
If you enter only the IP address or
EUM ID, then <username> defaults to
“buywavc”, <source> defaults to “null”, and
<destination> defaults to “null”—the link
speed test.
Retrieves a file from a remote location.
•
<aaa.bbb.ccc.ddd> is the IP
address of the computer from which
you are retrieving the file.
NOTE: You can use <EUM_ID> in
place of the IP address for EUMs or
CCUs.
•
<username> is the user name required
to log on to the remote computer.
Defaults to “buywavc” if left blank.
•
<password> is the password to log on
to the remote computer. If you omit the
password argument, you will be
prompted for the password, which will
be asterisked out and not recorded in
the system log. Use _ when the
password is blank.
•
<source> is the path and filename of
the file that is being retrieved from the
remote computer. Defaults to “null” if
left blank.
•
<destination> is the path and
filename to which the file will be copied.
Defaults to “null” if left blank.
file mkboot | makeboot
<filename>
Makes a new boot file. Use this command
with caution.
•
<filename> is the name of the new
boot file.
file rename | rn <from> <to> Renames a file.
•
<from> is the old file name.
•
<to> is the new file name.
help Displays the console command structure.
ip Displays the CCU IP address assignments.
ip ethernet Displays the Ethernet IP address of the
CCU.
NOTE: If the CCU is in Switched Ethernet
mode or Through Only mode, this command
displays the CCU IP address.
Command Syntax (CCU) Command Description