User's Manual Part 2

218 APCD-LM043-8.0 (DRAFT C)
Appendix D: INOP Commands
ip ethernet <aaa.bbb.ccc.ddd>
<netmask>
Changes the IP address of the EUM.
•
<aaa.bbb.ccc.ddd> is the new IP
address of the EUM.
•
<netmask> is the subnet mask of the
EUM IP address
(0-32).
√
ip gateway Displays the IP address of the router
through which the EUM connects to the
Internet. In routed mode networks, this is
the IP address of the router.
ip gateway <aaa.bbb.ccc.ddd> Changes the router through which the EUM
connects to the Internet.
•
<aaa.bbb.ccc.ddd> is the radio IP
address of the router through which the
EUM connects to the Internet. In routed
mode networks, this is the CCU radio
IP address.
√
password Initiates the process for changing the
system password.
pcf Displays the permanent configuration file
(PCF).
ping <aaa.bbb.ccc.ddd>|<eum_id>
<length> <interval>
Sends ICMP echo requests to a remote
host.
•
<aaa.bbb.ccc.ddd> is the IP
address of the remote host.
• <eum_id> is the EUMID (in the form
XX:XX:XX) of an EUM or CCU to ping.
• <length> is an optional parameter
defining the ping packet size in bytes.
The default length is 64 bytes, and the
maximum length is 1460 bytes.
• <interval> is an optional parameter
defining the number of milliseconds
between pings. The interval may be
from 100 to 4000 milliseconds, and the
default is 490 milliseconds.
Press any key to halt.
radio Displays the radio attributes of the EUM.
radio frequency Displays the EUM radio frequency in tenths
of a MHz; for example, 905.0 MHz is
displayed as 9050.
Command Syntax (EUM) Command Description