User Manual
Table Of Contents
- Copyright
- Software License Agreement
- Warranty
- Contents
- Figures
- Tables
- Preface
- 1 Introduction
- 2 MDB1000
- 3 Setup Menu
- 4 Installation
- Appendix A Factory Configuration
- Appendix B Ethernet Cables and Connectors
- Appendix C Acronyms and Abbreviations
- Index
8 APCD-LM048-1.1
1: Introduction
WARNING!
Plug the EUM3006 directly into routers or Ethernet switches
ONLY if these are providing compatible 48 VDC 802.3af Mode
B PoE power, in lieu of the supplied PoE Injector.
1.3.5 PoE Lightning Arrestor
A PoE lightning arrestor (not supplied) is used with the EUM3006 if required by the local
building code and/or the EUM3006 is being installed in an area subject to direct or indirect
lightning induced surges. The lightning arrestor must be able to pass the Ethernet data lines
as well as the Power over Ethernet lines. The lightning arrestor must be grounded in
accordance with local and national electrical codes.
1.4 Installation Aids
The following features make installation much easier and faster:
• MDB1000 on page 9
• Setup Menu on page 15
The chapter on Installation on page 21 gives step-by-step instructions to ensure a successful
installation.