User Manual
Table Of Contents
- Copyright
- Software License Agreement
- Warranty
- Contents
- Figures
- Tables
- Preface
- 1 Introduction
- 2 MDB1000
- 3 Setup Menu
- 4 Installation
- Appendix A Factory Configuration
- Appendix B Ethernet Cables and Connectors
- Appendix C Acronyms and Abbreviations
- Index
2: MDB1000
APCD-LM048-1.1 13
Table 2 MDB1000 Signal Quality LEDs
Getting any Signal Strength reading at all indicates that packets are being received from the
CCU. The higher the signal strength and signal quality indicators, the lower the packet error
rate and the higher the fade margin for the EUM3006. The goal should be a signal strength of
5 or higher and a signal quality of 4 or 5. Regardless of the levels, the EUM3006 should be
aligned so that the indicators are the highest possible for the given site.
A/B
Reserved for future use.
LED Meaning
0 Extremely Poor
1 Very poor
2 Poor
3 Adequate
4 Good
5 Very Good