User Manual
Table Of Contents
- Copyright
- Software License Agreement
- Warranty
- Contents
- Figures
- Tables
- Preface
- 1 Introduction
- 2 MDB1000
- 3 Setup Menu
- 4 Installation
- Appendix A Factory Configuration
- Appendix B Ethernet Cables and Connectors
- Appendix C Acronyms and Abbreviations
- Index
16 APCD-LM048-1.1
3: Setup Menu
3.2 Setup Menu
The Setup Menu structure consists of a menu with four selections.
Setup Menu
WaveRider Communications, Inc. EUM3005
Password: *****
WaveRider Communications Inc. Setup Menu
Modem Serial Number : C00017
Station Identifier (EUM ID): 40:00:17
Software Version : 10.0
Search State : Searching for CCU
Menu
====
(R)adio Link Status - Use this for pointing the antenna
(T)roubleshooting information - for network operator
(H)elp
e(X)it
type option and press enter > r
The Setup menu identifies the modem, the software version and search state. In this case, the
modem is configured for Auto CCU Discovery and it is searching to find the best available
CCU.
There are 4 options:
• Radio Link Status - see section 3.3, Radio Link Status Display
• Troubleshooting information - see section 3.4, Troubleshooting Information Display
• Help - this provides an on-line explanation of the options and the information
displayed with each.
• Exit - this terminates the telnet session.
3.3 Radio Link Status Display
The Radio Link Status display is the key setup display for aligning the antenna and verifying
the link, in a manner similar to the MDB1000. The Radio Link Status display shows the search
state of the modem, which is either: