User Manual

36 APCD-LM048-1.1
4: Installation
Ping Internet by Name
Use the following test to verify that the DNS server IP address is correctly configured in the
end-user’s PC and is operating properly:
C:\> ping www.google.com
Pinging www.google.akadns.net [216.239.39.104] with 32 bytes of data:
Reply from 216.239.39.104: bytes=32 time=72ms TTL=241
Reply from 216.239.39.104: bytes=32 time=69ms TTL=241
Reply from 216.239.39.104: bytes=32 time=76ms TTL=241
Reply from 216.239.39.104: bytes=32 time=68ms TTL=241
Ping statistics for 216.239.39.104:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 68ms, Maximum = 76ms, Average = 71ms
4.4 Post-Installation
Once a good link between the CCU and the EUM3006 has been established, the configuration
can be completed automatically using the Automatic Remote Configuration feature with a
RADIUS Server and database in which the EUM3006 information has been entered. The
network operator must update the RADIUS database for the new modem. The configurable
items that can be included in the Automatic Remote Configuration include:
• password,
• all SNMP parameters,
• RF Frequency (including enabling Auto CCU Discovery)
• number of customers.
If the Automatic Remote Configuration feature is not used, then the network operator can
connect to the EUM3006 over the air and complete the configuration.
Details on configuring a RADIUS Server or manually configuring an individual EUMs are
covered in the LMS4000 Managing the Network manual or other manuals, available on the
WaveRider web-site.