User's Manual

WaveCom Electronics Inc
MA4061/MA4070 Manual; MAN1L2301 Rev02 (Oct 2001)
Approved: R. L.
13
3.1.2 MA4061B – Upconverter Card
D
DD
D
IAGRAM
IAGRAM IAGRAM
IAGRAM
3.1
3.13.1
3.1
C
C C
C
: F
: F: F
: F
RONT
RONT RONT
RONT
P
PP
P
ANEL
ANEL ANEL
ANEL
–
––
– MA4061B
MA4061B MA4061B
MA4061B
POWER ON LED
When the green POWER ON indicator is illuminated, the module has been correctly installed and powered on.
RF ENABLED LED
When the green RF ENABLED indicator is illuminated, the internal output circuitry is enabled to provide an RF
output. The RF ENABLED indicator does not necessarily indicate the presence of an output, it only reflects
that the module is capable of an RF output if an IF input is applied and the levels configured.
MODULE SELECT LED
When the green MODULE SELECT indicator is illuminated, it indicates that the corresponding module has
been selected from the front panel or via the remote control interface.
ALARM LED
The red MA4061 ALARM indicator has two modes. A flashing Alarm LED indicates a non-critical alarm
condition (i.e. soft alarm). A constant Alarm LED indicates a critical alarm condition (i.e. hard alarm). Detailed
alarm information is available by selecting the corresponding module from the front panel and observing the
status and error codes on the LCD display.
WaveCom
MA4061B
POWER
MODULE
SELECT
A
LARM
MMDS DIGITAL
UPCONVERTER
RF ENABLED