User's Manual

WaveCom Electronics Inc
MA4061/MA4070 Manual; MAN1L2301 Rev02 (Oct 2001)
Approved: R. L.
18
3.3 Remote Control Operating Instructions
The MA4000 system may be controlled via the RS232/RS485 Remote Interface connector. (Refer to Section
4.1, Power/Control Module Rear Panel Connections (pp 19, 20) for the connector pin-out).
The input data rate can be 9600, 14400, or 28800 baud. The MA4000 System Controller will automatically
determine which data rate is in use and adjust accordingly. There are no user settings relating to baud rate
selection.
For additional information refer to Section 7.0, Detailed Remote Control (pp 31 to 41).