User's Manual

WaveCom Electronics Inc
TR2126SE Manual; ml_tr2126se_04 (May 2003)
Approved: C.H.
7
1.3 Specifications
UPCONVERTER SPECIFICATIONS
IF Input Frequency 14.375 to 26.375 MHz
RF Output Frequency 2150 to 2162 MHz
Output (1dB Compression Point) +27 dBm
Gain 20 ± 2 dB across full temperature range
Gain Flatness +/- 1 dB
In-band Spurious -60 dBc
Out-of-band Spurious -60 dBc
Phase Noise -93 dBc/Hz @ 10 kHz
-115 dBc/Hz @ 100 KHz
IF Level for RF Activation +3 dBmV
DOWNCONVERTER SPECIFICATIONS
RF Input Frequency 2500 to 2686 MHz
IF Output Frequency 222 to 408 MHz
Nominal Gain 32 ± 2 dB
Gain Flatness +/- 1.5 dB; ± 0.3 dB/ 6 MHz
Noise Figure ≤5.0 dB @ 20C, typically 4.0 dB
Output 3rd Order Intercept +22 dBm at nominal gain
WCS Rejection 70 dB
Combined Image and PCS Rejection 85 dB
Spurious -65 dBm max.
Phase Noise -93 dBc/Hz @ 10 kHz
-115 dBc/Hz @ 100 kHz
GENERAL
Frequency Setting & Stability ± 7.5 kHz (-40 to +60°C)
Frequency Stability Over Time <±10 kHz over 10 years
RF Connector N female, 50 ohms
IF Connector F female, 75 ohms
Input/Output VSWR 2:1
DC Supply 12 to 24 V, 12 Watts max.
Operating Temperature -40 to +60°C (-40 to +140°F)
Size 6" x 8" x 0.9" (15.24 x 20.32 x 2.29 cm)
Mounting Pole mount (1” to 1.75” (25mm to 44mm) diameter)
Specifications subject to change without notice.