User's Manual

WaveCom Electronics Inc
TR2126SE Manual; ml_tr2126se_04 (May 2003)
Approved: C.H.
8
2.0 INSTALLATION
2.1 Unpacking the Unit
Carefully remove the equipment from its packing material and set it on a solid surface, such as a table or
desk. If it appears damaged in any way, notify the carrier, and keep all packing materials for inspection by the
carrier’s agent.
2.2 Mounting the Unit
2.2.1 Mounting the TR2126SE
The following hardware is included in the box for mounting the TR2126SE to the pole:
• 1 pole catch
• 1 V-bolt
• 2 ¼”x20 flange locknuts for connecting V-bolt and pole catch to the pole
The TR2126SE was designed for mounting to a pole with a diameter of 1.0" to 1.75". Please ensure that the
pole used is attached securely to the building or other mounting location. Simply secure the TR2126SE unit to
a pole as shown in Figure 2.2A with F-Connector on the bottom.
D
DD
D
IAGRAM
IAGRAM IAGRAM
IAGRAM 2.2
2.22.2
2.2A
AA
A: M
: M: M
: MOUNTING THE
OUNTING THE OUNTING THE
OUNTING THE U
UU
UNIT
NITNIT
NIT