User's Manual

tri2525b_ml_03_sd Approved: G.V. 12
Vecima Networks Inc.
STEP 3 – Position TRI2525B against pole
Using the other hand, bring the TRI2525B up to the pole catch and grab V-bolt, pole catch and L-
bracket in a single hand. Ensure that the pole is inside the “L” of the L-bracket and not on the outside of
the L. This is necessary to maintain antenna alignment during high winds.
STEP 4 – Tighten TRI2525B against pole
Tighten both ¼” locknuts against the L-bracket so that the unit is held against the pole but can still be
rotated and tilted up and down for antenna alignment. The locknut closest to the antenna can be
tightened almost all the way while the back one should be approximately finger tight.