User's Manual

tri2525b_ml_03_sd Approved: G.V. 13
Vecima Networks Inc.
2.3 Connection to the Power Inserter and Cable Modem
Connections to the TRI2525B are made as shown in Diagrams 2.2B and 2.3A.
Please note:
1) Connect the TRI2525B F-Connector to the power inserter, located indoors with the cable modem.
The power inserter is then connected to the Cable Modem, only after the antenna is aligned. The
power inserter has three connections:
DC POWER Connect to wall adapter with the supplied RG-59 cable with F
connectors
TO MODEM Connect to cable modem (install modem only after the antenna is
aligned)
TO TRANSCEIVER Connect to TRI2525B
WARNING!
If the power inserter is not correctly connected, the TRI2525B will not
operate, and there is the potential to damage the cable modem.
Ensure that all wires and cables are hooked up before plugging into the
AC adapter/power supply (i.e. hook up to the power supply last).
2) After connection, the F connector must be waterproofed with the supplied rubber sealing tape. See
Section 2.4 for details.
D
IAGRAM 2.3A: CONNECTION TO CABLE MODEM VIA POWER INSERTER