User`s manual
- 9 -
Make sure the inverter is not close to any potential source
of inammable fumes or gases before connecting the
inverter to the power source.
Make sure the power consumption of the appliance or
equipment you want to operate is compatible with the
capacity of the inverter, i.e. does not exceed 750 watts.
If you are using the power inverter to operate a battery
charger, monitor the temperature of the battery charger for
about 10 minutes. If the battery charger becomes abnor-
mally warm, disconnect it from the inverter immediately.
Use only (2) 50-amp or (2) 40-amp spade type fuses.
If you are powering the inverter with an automobile or ma-
rine battery, start the engine every 30 to 45 minutes and
let it run for about 10 minutes to recharge the battery.
If you hear a continuous alarm or automatic shut down, turn
the inverter OFF immediately. Do not restart the inverter
until the source of the problem has been identied and
corrected.
Disconnect the inverter when not in use, in order to avoid
battery drain.