User manual
Table Of Contents
Manual Driver Installation
© Vector Informatik GmbH Version 2.0 - 53 -
4.5.2 FlexRay
Device test
The operating test for FlexRay can be executed with the following devices:
> VN3300
> VN3600
> VN7570
> VN7600
FRLoop.exe
This operating test requires an inserted FRpiggy.
1. Remove the FlexRay cable if it is connected.
2. Start \Drivers\Common\FRLoop.exe from the driver CD.
3. Execute the test.
4. If no error messages occur, the operating test was successful.