User`s guide

14 Block Reference

14-28

Variable name

Specify the variable saved in the MAT-file that holds the CAN message information.

Number of times to replay messages

Specify the number of times you want the message replayed in your model. You can

specify any positive integer, including Inf. Specifying Inf continuously replays

messages until simulation stops.

Replay messages to

Specify if the model is replaying messages to the CAN network or an output port.

Select a device to replay to the CAN network.

Device

Select the device on the CAN network to replay messages to. This filed is unavailable

if you select Input port for Replay message to option.

Sample time

Specify the sampling time of the block during simulation, which is the simulation

time as described by the Simulink documentation. This value defines the frequency

at which the CAN Replay block runs during simulation. If the block is inside a

triggered subsystem or to inherit sample time, you can specify –1 as your sample

time. You can also specify a MATLAB variable for sample time. The default value is

0.01 (in seconds).