User`s guide

CAN Transmit
14-31
Dialog Box
Use the Sink Block Parameters dialog box to select your CAN Transmit block
parameters.
Tip Configure your CAN Configuration block before you configure the CAN Transmit
block parameters.
Device
Select the CAN device and a channel on the device to use to transmit CAN messages
to the network. This list shows all the devices installed on the system. It displays the
vendor name, the device name, and the channel ID. The default is the first available
device on your system.
Transmit messages periodically
Select this option to enable periodic transmit of the message on the configured
channel to transmit at the specified period.
Message period (in seconds)
Specify a period in seconds. This value is used to transmit the message in the
specified period. By default this value is 1.000 seconds.