User`s guide

CAN Unpack
14-33
CAN Unpack
Unpack individual signals from CAN messages
Library
CAN Communication
Embedded Coder/ Embedded Targets/ Host Communication
Description
The CAN Unpack block unpacks a CAN message into signal data using the specified
output parameters at every timestep. Data is output as individual signals.
Note: To use this block, you also need a license for Simulink software.
The CAN Unpack block has one output port by default. The number of output ports is
dynamic and depends on the number of signals you specify for the block to output. For
example, if your block has four signals, it has four output ports.
Other Supported Features
The CAN Unpack block supports:
• The use of Simulink Accelerator Rapid Accelerator mode. Using this feature, you can
speed up the execution of Simulink models.