User`s guide

14 Block Reference
14-46
XCP Data Acquisition
Acquire selected measurements from configured slave
Library
XCP Communication
Description
The XCP Data Acquisition block acquires data from the configured slave based on the
selected measurements. The block uses the XCP CAN transport layer to obtain raw
data for the selected measurements at the specified simulation time step. Configure
your XCP connection and use the XCP Data Acquisition block to select your event and
measurements for the configured slave. The block displays the selected measurements as
output ports.
Other Supported Features
The XCP Data Acquisition block supports the use of Simulink Accelerator and Rapid
Accelerator mode. Using this feature, you can speed up the execution of Simulink models.
For more information on this feature, see the Simulink documentation.
The XCP Configuration block also supports code generation with limited deployment
capabilities. Code generation requires the Microsoft C++ compiler.
Dialog Box
Use the Block Parameters dialog box to select your data acquisition parameters.