User`s guide

14 Block Reference
14-50
XCP Data Stimulation
Perform data stimulation on selected measurements
Library
XCP Communication
Description
The XCP Data Stimulation block sends data to the selected slave for the selected event
measurements. The block uses the XCP CAN transport layer to output raw data for
the selected measurements at the specified stimulation time step. Configure your XCP
session and use the XCP Data Stimulation block to select your event and measurements
on the configured slave. The block displays the selected measurements as input ports.
Other Supported Features
The XCP Data Stimulation block supports the use of Simulink Accelerator and Rapid
Accelerator mode. Using this feature, you can speed up the execution of Simulink models.
For more information on this feature, see the Simulink documentation.
The XCP Configuration block also supports code generation with limited deployment
capabilities. Code generation requires the Microsoft C++ compiler.
Dialog Box
Use the Block Parameters dialog box to select your data stimulation parameters.