Operating instructions

Technical Data Vector Control Chassis Type Frequency Converter
476 869 4070 76 J AB-74 Siemens AG
4-10 Operating Instructions SIMOVERT MASTERDRIVES
Order No. Power loss Cooling Maximum
(at 2.5 kHz)
[kW]
water
require-
ment
[L/min]
additional heat
dissipation at Tair
≤ 30 °C [kW]
Rated input voltage 3 AC 380 to 480 V
6SE7031-0EE60-1AA0 1.18 12 0.7
6SE7031-2EF60-1AA0 1.67 12 0.7
6SE7031-5EF60-1AA0 1.95 12 0.7
6SE7031-8EF60-1AA0 2.17 12 0.7
6SE7032-1EG60-1AA0 2.68 26 1.5
6SE7032-6EG60-1AA0 3.40 26 1.5
6SE7033-2EG60-1AA0 4.30 26 1.5
6SE7033-7EG60-1AA0 5.05 26 1.5
Rated input voltage 3 AC 500 to 600 V
6SE7026-1FE60-1AA0 0.91 12 0.7
6SE7026-6FF60-1AA0 1.02 12 0.7
6SE7028-0FF60-1AA0 1.26 12 0.7
6SE7031-1FF60-1AA0 1.80 26 1.5
6SE7031-3FG60-1AA0 2.13 26 1.5
6SE7031-6FG60-1AA0 2.58 26 1.5
6SE7032-0FG60-1AA0 3.40 26 1.5
6SE7032-3FG60-1AA0 4.05 26 1.5
Rated input voltage 3 AC 660 to 690 V
6SE7026-0HF60-1AA0 1.05 12 0.7
6SE7028-2HF60-1AA0 1.47 12 0.7
6SE7031-0HG60-1AA0 1.93 26 1.5
6SE7031-2HG60-1AA0 2.33 26 1.5
6SE7031-5HG60-1AA0 2.83 26 1.5
6SE7031-7HG60-1AA0 3.50 26 1.5
6SE7032-1HG60-1AA0 4.30 26 1.5
Table 4-8 Water-cooled converter
These units and the air-cooled converters are identically constructed.
Instead of the heat sink for air, an air/water cooler has been installed.
All the technical data not listed in Table 4-8 for a particular unit are the
same as those of the air-cooled converter. The first 12 positions of the
Order No. are identical. The supplement "-1AA0” indicates water
cooling.
Refer to the tables in Section 4.3 for the data for water-cooled units of
type K.
Water-cooled
converter
NOTE