System information

Getting Started

VAX 4000 Model 108 User Information

2-5

________________________ CAUTION___________________________

• To avoid damage from static discharge, touch bare (unpainted) metal on the

system box before you touch anything inside the system.

• To avoid damage from overheating, be careful not to run the system without

the cover in place for extended periods of time.

____________________________________________________________

1. Make sure the system is turned off and unplugged.

2. Facing the rear of the unit, locate and loosen the three thumbscrews that fasten the

top cover to the enclosure. Pull back on the cover sides two to three inches, and lift

the cover up and away from the enclosure.

MLO-013628

Figure 2-4 Removing the Cover