System information

Getting Started
2-28
VAX 4000 Model 108 User Information
Connecting to the HSD10 SCSI Port
The VAX 4000 108 comes with an HSD10 in the second slot up from the bottom on the
I/O receiver which must be terminated if not used.
To connect external SCSI devices (Figure 2-22) or a terminator (Figure 2-23) to the
HSD10 SCSI port which is the second one up from the bottom, follow these steps:
1. Set the on/off switch on the device to the off (O) position.
2. Remove the SCSI terminator (if attached).
3. Connect the SCSI cable.
4. Set the on/off switch on the peripheral(s) to the on (l) position.
MLO-013681
Figure 2-22 Connecting to the HSD10 SCSI Port