System information

Getting Started
2-40
VAX 4000 Model 108 User Information
Removing the System Unit from a Network
The following subsections describe how to remove the system unit from a network.
__________________________ Note ____________________________
Before removing the system unit from a network:
• Get the approval of the network coordinator.
• See the operating system documentation for information on the shutdown
procedures before stopping or turning off the system.
• If the system is the server in a network, do not turn off, halt or restart the
system without notifying the other network members.
___________________________________________________________
Removing the System Unit from a ThinWire Ethernet Cable
To remove the system unit from a ThinWire Ethernet cable, follow these steps:
1. Power the system off.
________________________ Caution___________________________
Disconnecting the ThinWire Ethernet terminator or the ThinWire Ethernet cable
connectors from the T-connector may cause disruptions to network
communications.
___________________________________________________________
2. Disconnect the entire T-connector from the system unit (see Figure 2-10).