System information

Installing Hardware Options

3–4

VAX 4000 Model 108 User Information

MLO-013629

Figure 3-2 SIMM Bank Configuration

Installing or Removing Memory Modules (SIMMs)

To add or remove a set of memory modules (SIMMs) to a bank, see Figure 3-3 and Figure

3-4 and follow this procedure:

1. Turn off your system and unplug the power cord from the wall outlet.

2. Unlock and remove the thumbscrews that secure the top cover and remove the cover,

as described earlier in this chapter.

3. Remove the SIMM carrier by pushing back on the latches and lifting it out of its

connector.