User manual VECTRON SYSTEMS Vectron
Vectron POS ColorTouch 3 Date: June 6th, 2002 © 2002 by Vectron Systems, Muenster (Germany) Subject to error and modification Vectron User manual Vectron Systems Willy-Brandt-Weg 41 D-48155 Muenster www.vectron.
Vectron POS ColorTouch Table of contents 1 2 3 4 5 5.1 5.2 5.3 5.4 5.5 Introduction................................................................6 Shipment ......................................................................7 Notes on safety ..........................................................8 Instructions for use ..................................................9 Vectron POS ColorTouch ......................................10 The cash register and its components....................
Vectron POS ColorTouch 7.6 7.6.1 7.6.2 7.6.3 7.7 7.8 Void and merchandise return.................................... 24 Error correct ..................................................................... 24 Void ...................................................................................... 25 Merchandise return....................................................... 25 Change invoice format ................................................. 25 Final Remark ...........................................
1 Vectron POS ColorTouch Introduction We very much appreciate your purchase of the Vectron POS ColorTouch. You have decided in favor of a high quality product that will support you in your daily work. This manual describes the cash register as well as its starting and operation. It provides you with important information on the smooth operation of your POS system. At the end of the manual you find the supplement with technical data, pin assignment, glossary, and index.
Vectron POS ColorTouch 2 7 Shipment In order to deploy the Vectron POS ColorTouch, you require: • A Vectron POS ColorTouch with the appropriate software license. • A mains cable for the power supply Note: Depending upon the order placed, the shipment of your Vectron POS ColorTouch might vary. If your delivery is incomplete, please refer to your dealer for assistance. Your dealer will supply the systems and install it. You may then start working immediately.
3 Vectron POS ColorTouch Notes on safety When operating your Vectron POS ColorTouch please follow these instructions: • Improper installation, maintenance, or operation may result in injury to the user and damage to the devices. • Maintenance and repair of the Vectron POS ColorTouch is to be carried out only by trained personnel. • The Vectron POS ColorTouch has been manufactured to the highest possible standard.
Vectron POS ColorTouch 4 9 Instructions for use Please follow these instructions: • Only operate the cash register with the dealer installed peripherals. • Do not insert any foreign objects into any openings on the devices. • The Vectron POS ColorTouch must be plugged into a properly grounded outlet. • Do not use the device near strong electromagnetic fields (TV, Loudspeakers, etc) • The cash register may not be exposed to direct sunlight.
5 Vectron POS ColorTouch Vectron POS ColorTouch The Vectron POS ColorTouch distinguishes itself by a number of technical features and functions. The 32-bit-technology and the battery buffered RAM accelerate data access, guarantee fast processing, and avoid data loss in case of a power failure. In addition, the Vectron POS ColorTouch has a small, compact cabinet which only requires a small footprint. 5.
Vectron POS ColorTouch 11 TFT touch display Covering cap Clerk lock Fig. 1: Vectron POS ColorTouch in light design, with lock system EasyReader3 TFT touch display Covering cap Clerk lock Fig.
Vectron POS ColorTouch 5.2 Connections At the bottom of the Vectron POS ColorTouch are numerous connections, via which external devices can be connected. The Vectron POS ColorTouch offers six RS-232 interfaces. Via one of these interfaces, your cash register system can be connected to a PC. This connection would allow for instance, to update the software of your cash register system, or to read and process registrations.
Vectron POS ColorTouch 13 5.3 Identification lock The Vectron POS ColorTouch in figure 1 and 2 has an identification lock at the front side of its cabinet. In this example, the figures show a so-called EasyReader3. Every clerk who has the suitable key can work with the ECR. The key must only be approached to the lock and the ECR recognizes the clerk and releases the predefined authorizations. Instead of an EasyReader3, the Vectron POS ColorTouch can also be equipped with other locks.
Vectron POS ColorTouch 5.5 Vectron POS ColorTouch “Special Edition” The Vectron POS ColorTouch is available in a high-quality design, the “Special Edition”. In this design, the cash register system is exclusively available in dark. The covering caps at all four corner points, as well as the type label, are made of special steel. The Vectron POS ColorTouch can be combined with all lock types.
Vectron POS ColorTouch 6 15 Getting started Place the cash register on a stable and even surface. The set-up area must guarantee that the cash register is protected from bad influences such as high or low temperatures, high air humidity or splash. Please refer to the appendix for all relevant data concerning the set-up area. The power connection of the Vectron POS ColorTouch is at the bottom, connect the ECR to the mains.
7 Vectron POS ColorTouch Operation This chapter gives an overview on the functions of your Vectron POS ColorTouch and an introduction into the basic operating procedures. Your Vectron dealer has programmed your POS system to meet your operating requirements. Because of this some operating procedures may differ from those described in this manual. Your Vectron dealer will fully explain the functions installed for you. 7.
Vectron POS ColorTouch 17 7.1.3 Log off For log off, there are also various possibilities: • • • • by removal of the key, by holding the key to the lock again, by closing the receipt, by depressing the key. 7.2 Guest checks and hold buffers Guest checks and hold buffers serve to keep open several invoices simultaneously. This function is often required in restaurants, to store the goods consumed for each guest check.
Vectron POS ColorTouch 7.2.3 Paying a guest check To pay a guest check, enter the number and press the key. The display shows the balance. Depress the or or other payment key. The invoice is now printed and the guest check will be cleared so that it may be used for a new customer. You may enter the amount the customer gives you before depressing the key and the change is displayed. Depending on the programming of your register, there are several other possibilities.
Vectron POS ColorTouch 19 7.2.5 Guest check move Rather than splitting single PLUs from one check to another, “Check Move” allows the entire check to be moved to another guest check. The clerks must be vested with the according authorization. • Open the G.C. to be moved. If the G.C. has already been opened, close it with and re-open it. G.C. moves can only be carried out if the G.C. is opened anew. • Enter the destination check number and depress .
7.3 Vectron POS ColorTouch Reports There are many different reports available. Reports can be selected via the key or via special keys and can be printed on the integrated printer. It is also possible to read reports by means of the PC program Vectron Commander and to process them on the computer. Note: It depends on the clerks’ authorization which reports can be called. Please contact your Vectron dealer. By pressing , the Vectron POS ColorTouch can store and print X- and Z-reports.
Vectron POS ColorTouch 21 Open GCs Lists all guest checks that have not yet been paid. Invoices Shows all invoices that were created in the reporting period. • An X-report creates an intermediate bill with the guest check still open for service. • A Z-report creates a final bill and closes the guest check. Hourly report Indicates the turnover per hour. Transactions Gives an overview of the financial data, including turnover, taxes and cash in drawer totals.
7.4 Vectron POS ColorTouch Input and output 7.4.1 Input of amounts Amounts are generally entered into the cash register with two decimal points. The point can also be omitted. For ten Dollars enter “1000” or “10.00”, for 3.95 Dollars “395” or “3.95”. 7.4.2 Screen windows Depending on the programming different windows are available on the screen. The most important will be explained here. By means of the key you can switch between the individual windows or select new ones.
Vectron POS ColorTouch 7.5 23 Making a sale The usual procedure is as follows: • PLU-items and their prices are entered. • The sale is invoiced and passed to the customer. • The customer pays The details of each of these steps are explained in the following sections. A clerk must be logged-on (see above). 7.5.1 Input of PLUs There are different ways to enter PLUs: • Enter the PLU number, followed by the key • By depressing the direct PLU-key (e.g.
Vectron POS ColorTouch 7.5.3 Payment After all PLUs have been entered depress < Subtotal >. The sum of all amounts is displayed and can be told to the customer. If the customer pays cash, enter the amount that you get and depress . The change for the customer is displayed and the receipt is printed. If the customer pays the exact amount you can directly depress without entering an amount. If the customer does not pay cash, depress the key with the respective media e.g.
Vectron POS ColorTouch 25 7.6.2 Void If you wish to delete another PLU item depress and select the PLU to be deleted via direct PLU key or PLU number (see above). If you want to delete additional PLUs, press the key again. 7.6.3 Merchandise return When working in a guest check, it is only possible to return those PLUs that have previously been sold on this guest check. When in a cash sale, you may return any PLU items. To carry out a merchandise return press the key.
7.8 Vectron POS ColorTouch Final Remark We hope that we were able to give you some helpful information about your Vectron POS ColorTouch. Due to the numerous programming possibilities, the description had to be quite general and the information restricted to the main functions. Your Vectron dealer will gladly answer any of your questions. For a detailed overview of the functionality of your Vectron POS ColorTouch, please have a look at the Vectron POS software manual. Please visit us on the web at www.
Vectron POS ColorTouch 8 27 Equipment options The Vectron POS ColorTouch can be varied manifold. Thus, numerous accessories are available for this cash register system: • • • • Lock systems Integrated customer display SRAM extensions Flash ROM extension 8.1 Lock systems 8.1.1 Dallas iButton, standard and magnetic The Vectron POS ColorTouch is available with three different lock systems, here at first lock system ‘Dallas iButton’.
Vectron POS ColorTouch 8.2 Integrated customer display For ideal completion, an integrated customer display is available for the Vectron POS ColorTouch. Clerk lock TFT touch display Integrated customer display Fig.
Vectron POS ColorTouch 29 8.3 RAM extensions Standard RAM equipment of the Vectron POS ColorTouch is one megabyte of system memory. In order to upgrade the cash register system, three memory extensions are available: 1MB, 3MB, and 8MB. Fig. 10: Memory extension, 1MB Fig. 11: Memory extension, 3MB Fig. 12: Memory extension, 8MB 8.4 Flash ROM extension Furthermore, an extension of the flash ROM memory is available for the Vectron POS ColorTouch.
9 Vectron POS ColorTouch Service and maintenance The cash register does not contain any parts that can be serviced by the user. Please leave all maintenance and service to the retailer. Attention! Attention! Do not carry out any maintenance or service on your own. Only authorized service staff may open the cabinet. Unauthorized manipulations at the Vectron POS ColorTouch may be extremely dangerous and lead to a loss of guarantee and liability claims.
Vectron POS ColorTouch 31 10 Disposal Vectron Systems is legally obliged to take back electric and electronic equipment that was produced by or on behalf of the company after use and to guarantee a proper recycling of this equipment. Please send back any electric or electronic devices and any accessories or peripherals that you do not require or that cannot be used anymore to your Vectron Systems partner.
Vectron POS ColorTouch Appendix 1 Optional accessories Beyond the regular accessories, there are optional articles available for the Vectron POS ColorTouch that are displayed in the following. They comprise: • Protective foil for the TFT touch display • Peripheral devices • Special steel rack 1.1 Protective foil for the TFT touch display A protective foil is available for the Vectron POS ColorTouch, that protects the screen from general contamination and moisture.
Vectron POS ColorTouch 1.2 33 Peripheral devices On account of the Vectron POS ColorTouch’s extensive connections, numerous peripheral devices can be connected to that cash register system. They include external customer displays, printers, magnetic card readers, scanners, etc. 1.3 Special steel rack The image shows the Vectron POS ColorTouch “Special Edition” with the table version of the special steel rack.
2 Vectron POS ColorTouch Pin assignment In the following, you will find the exact pin assignments of all interfaces of the Vectron POS ColorTouch. Drawer, PC keyboard, and serial RS-232 ports drawers 3 5 8. . . 8 1. . . 8 1. . . 8 1. . . 8 1. . . 8 1. . .
Vectron POS ColorTouch Parallel printer port 1 1 2 3 4 5 6 7 8 9 10 11 12 13 /Strobe Data0 Data1 Data2 Data3 Data4 Data5 Data6 Data7 /Acknlg /Busy PE Select 14 15 16 17 18 19 20 21 22 23 24 25 Auto Feed Error / Init Select In GND GND GND GND GND GND GND GND 10BaseT Network 8. . .
3 Vectron POS ColorTouch Technical data Vectron POS ColorTouch Software Depending upon hardware, particularly RAM, the following maximum values can be configured: • • • • • • 1,000,000 65,535 1,000 65,535 200 100 PLUs departments clerks guest checks or customers cash registers per network printers per network Hardware • 12.1” (30.
Vectron POS ColorTouch Weight and dimensions dimensions • 360 mm x 89 mm x 315 mm (LxHxW) weight • including customer display and lock without stand approx.
4 Vectron POS ColorTouch Technical data ColorTouch “Special Edition” Software Depending upon hardware, particularly RAM, the following maximum values can be configured: • • • • • • 1,000,000 65,535 1,000 65,535 200 100 PLUs departments clerks guest checks or customers cash registers per network printers per network Hardware • 12.1” (30.
Vectron POS ColorTouch Weight and dimensions dimensions • 360 mm x 89 mm x 315 mm (LxHxW) weight • including customer display and lock without stand approx.
5 Vectron POS ColorTouch EU declaration of conformity EU declaration of conformity Manufacturer ..................... Vectron Systems Address................................. Willy-Brandt-Weg 41, D-48155 Muenster, Germany Product designation ........ Vectron POS Type designation.............. Vectron POS ColorTouch Vectron Systems declares, that the above designated product complies with the fundamental standards of ISO/IEC guideline 22 and EN 45014 when applied as directed.
Vectron POS ColorTouch 6 Document revision Date alteration Mai 31st, 2002 First creation and publication 41
Vectron POS ColorTouch Glossary Barcode.............................................. Code on a merchandise that conists of vertical bars. Cash drawer .................................... Drawer in which cash is kept, connectable to a cash register system. CE......................................................... Duty for marking all devices, manufactured in or imported into the EU, verifying conformity with EU standards and regulations. Clerk key............................................
Vectron POS ColorTouch 43 Network card .................................. Extension interface card for establishing a network connection or for connecting a PC to an ECR. Network port ................................... Port, via which several computers or ECRs can be connected. Pixel .................................................... Smallest element of a digital image with defined coordinates, regarding location and color. POS ...................................................... Point Of Sale. RAM..
Vectron POS ColorTouch Index Symbols 32-bit 10 A Amount 18, 21, 22, 24 B Barcode 23, 42 Basic currency 24 C Cabinet 10, 13, 30, 36, 38 Cashier 20 Cashier invoice 20 Change 18, 19, 24, 25, 42 Cleaning 30 Clerk 13, 16, 18, 19, 20, 23, 24, 36, 38, 42 Clerk key 42 Clerk number 16 Currency 24, 42 Customer display 10, 27, 28, 36, 37, 38, 39 D Department 21, 23, 36, 38 Display 10, 13, 15, 18, 22, 24, 27, 28, 32, 36, 37, 38, 42 E Entertainment expenses 25 Entries 16, 17, 24 Error correct 24 Euro 24, 42 EU decl
Vectron POS ColorTouch F Final report 20 FlashROM 29 Flash ROM extension 29 Foreign currency 24 Free price input 23 G GC window 22 Guest check 17, 18, 19, 20, 21, 25, 36, 38 H Hardware 15, 36, 38, 42, 43 Hold buffers 17, 19 Hourly report 21 I Identification lock 13, 42 Info window 22 Input window 22 Installation 8 Instructions for use 6, 9 Interim report 20 Invoice 17, 18, 20, 21, 22, 23, 25 J Journal 21 K Key 12, 13, 16, 17, 18, 19, 20, 22, 23, 24, 25, 34, 36, 38, 42 Keyboard 12, 34, 36, 38 45
Vectron POS ColorTouch L LCD 42 Liability claims 30 License 7 Lock 11, 12, 13, 16, 17, 27, 34, 36, 37, 38, 39, 42 Log off 17 Log on 16 Loss of guarantee 30 M Mainboard 12 Mains 7, 15 Maintenance 8, 30 Main group 21 Making a sale 23 Media 18, 19, 24 Memory 15, 20, 29, 43 N Negative account 24 Network 12, 35, 36, 38, 42, 43 Notes on safety 6, 8 O Operation 6, 8, 10, 13, 16, 36, 38 Original packing 9 P Packing 9 Paying a guest check 18 PC 12, 20, 34, 36, 38, 43 PLU 13, 16, 18, 19, 21, 22, 23, 24, 25, 36,
Vectron POS ColorTouch R RAM 29, 36, 38 RAM extension 29 Receipt 17, 22, 24, 25 Repair 8, 9 Report 20, 21 Report level 21 S Screen window 22 Secret number 16 Self test 15 Serial number 15 Serial port 36, 38 Set-up area 15 Shift change 19 Software 7, 12, 15, 26, 36, 38, 43 Subtotal 18, 24 Subtotal invoice 18 T Technical data 6, 36, 38 TFT 10, 11, 13, 32, 36, 38 Total invoice 18 Touch display 13, 32 Transaction 21 V Vectron Commander 20 Void 16, 22, 24, 25 X X-report 20, 21 Z Z-report 20, 21 47
Vectron POS ColorTouch
